Volautomaat Type 1

3/4 Automatic Screen Printer


★Scope of Application

It is suitable for flat printing of glass, CD, nameplate, stickers, credit cards, ceramic flower paper, wooden toy puzzles and electronics industry PCB, SMT solder paste, membrane switch and other products. It is also suitable for flat printing of products with high precision of overprinting, such as gold and silver cardboard, metal sheet, PVC, etc.


★Main Parameters




Printing thickness


Max printing area


Air pressure

4.0~6.0 kfg/c㎡


Size of printing table


Rated voltage/Power

380V/50HZ /3.2KW


Max size of screen frame


Size of package carton



Max printing speed


Gross weight




 ★Main Performance


①vertical structure with the electronic driven printing plate goes up and down vertically, and the electronic driven print head moves left/right.
② Single chip controlled circuit, printing and plate goes up and down using independent driving source.
③ Pneumatic controller controls the printing knife moves up and down, photocell eye controls the stroke, which is independent to tune.
④ Set manual/semi-automatic /automatic three modes , the break time of printing is digital controlled.
⑤ Independent designed head rising and down setting, makes it convenient to clean the scraping blade/reclaiming blade、screen plate during loading and unloading.
⑥ Double guide column master the clamps arm, and install the adjusting device to adjust the distance between plates at the same time, which is convenient to tune.


★Configuration Instructions


① The machine controlled by MCU.
② Circuits adopt AC contactor chint, RIKO Photoelectric eye switch produced in Taiwan.
③ Adopt Cheng Bang Gear Motor from Taiwan, driven by Variable printing.
④ Printing scraper and reclaiming blade controlled by AirTAC brand pneumatic component.
⑤ Left/right scratchers adopt HIWIN precision liner guide from Taiwan.
⑥ Printing plate adopts pneumatic stainless steel and suction system which is produced by Shanghai State-owned factory.

Powder Machine


★Scope of Application


Full-automatic Power Coating Machine is a post printing machine which can be used to replace the traditional glitter powder/hot-melt powder technology. It has the features such as easy to operate, no dust pollution, etc. When it is used Full-automatic Press Grain Machine is a post printing machine which can be used to replace the traditional to equip the screen printing machine, the work efficiency can be increased greatly, the utilization ratio of glitter powder will rise and a great variety of glitter powder pictures can produce.
If required, this machine can easily connect with drying machines, UV glazing machines, etc. It adopts the upper and lower suction port design to prevent the occurrence of scratches on the surface of the film, and is the best post-press equipment for the film glitter process.


 ★Main Parameters




Suction type

Double suction

Max dusting width


Thickness of paper

max size of screen frame


Max working speed printing speed



3.0KW 380V 50HZ



★Main Performance


①The key parts of the machine such as conveyor belt, frequency converter are imported parts, which are easy to use and flexible adjustment.
②The unique powder spraying system enables the color powder to be evenly attached to the printed matter.
③With the color powder recovery system, the excess color powder is lightly pressed by the drum before being dried to make it evenly balanced.
④Podwer – lightly pressure – recycling – drying, high efficiency and energy saving completely solve the problem of uneven podwering, low efficiency, color powder flying all over the sky.
⑤All transmission parts of the whole machine are stepless adjustment, with high durability, good stability and other characteristics.

IR Drying Tunnel


★Scope of Application


It is suitable for rapid drying of solvent – based inks and drying of general moisture – containing items. Such as: paper printed matter, chemical products, glass, sheet, PVC, metal nameplate, etc.


 ★Main Parameters




Loading section

1000mm(to be determined)

Output section

1000mm(to be determined)

IR heating section

2000mm * 4groups

Cooling Section

2000mm * 1groups




★Drawing Description



☆Production material


①Heat curing oven:

Curing oven:80mm insulation board

②Shaft arm and base:1.4mm cold rolled plate

③Inner plate:1.2mm stainless steel plate


☆Heating source:220V 1000W 9 infrared heating tubes or carbon tubes


  Single heating length:900mm

  Total heating power:9KW

  The heating system is divided into one control, one temperature control and one temperature display in each group.

  Heating temperature requirement: Room temperature-180 degrees (adjustable)

  Relative temperature difference:±2 degrees (to ensure uniform heating temperature)

  Temperature control accuracy:±1 degree

Hot air circulation:380V 370W   Insulated centrifugal fan  1 Set


☆Conveyor system:


380V  1100W   Frequency control motor – Teflon mesh belt transmission(Taiwan/CPG)

380V  1500W   Frequency converter  (Taiwan/HOLIP)

Speed range:1-5m/min

Conveyor belt: High temperature resistant Teflon mesh belt, mesh belt width:1000mm    mesh:4*4mm


 ☆IR Heating system:


①2 sets of control units to control on/off.

③2 sets of thermostats to control and display temperature.